This AI-generated translation is currently being refined.
Bonyplus Fixobridge temporary dental cement temporarily reseals a fallen crown or bridge. It gives you time to make an appointment with your dentist to reattach the fallen prosthesis. Crowns and bridges are normally securely fixed. But sometimes, after a shock or chewing a sticky food such as caramel, the crown or bridge may come loose. The prosthesis must be carefully preserved. You need to make an appointment with your dentist as soon as possible to have it replaced. In the meantime, a temporary solution is to use a specially designed dental cement to fix the crown or bridge in a non-definitive way, while waiting for the appointment. Never use glue or any other improvised solution. Bonyplus Fixobridge temporary dental cement is effective, easy to apply and easy for the dentist to remove. It requires no mixing or complex dosage. Simply clean the crown or bridge, remove the previous cement, apply the new cement and reattach the prosthesis. The cement activates on contact with saliva and sets in just 15 to 20 minutes. You can even chew 3 hours after setting! In addition to temporary dental cement, the kit includes a spatula and microbrushes. Recommended use: one application lasts up to one month.
Réf : 7611645000046
Bonyplus Fixobridge temporary dental cement
33,95€
In stock
Remove as much of the old cement as possible from inside the crown or bridge. Do not apply excessive force which could damage the crown.
Clean the inside of the crown using the kit's micro-brush with warm water and soap. Rinse under running water. The crown should be damp but not wet.
Using a new micro-brush, clean the snags, i.e. the area where the crown or bridge will be replaced. Rinse the mouth with water, without drying the snags.
Apply a small amount of Fixobridge cement to the inner edge of the crown using a spatula. Take care not to fill the crown. For bridgework, use the spatula to apply a small amount of cement to the inner edges of the crowns.
Then press the crown onto the stump for around 3 minutes. In the case of a bridge, gently place it on the stumps and press with thumb and fingers. Bite down lightly to fix the bridge. When the jaws can be clamped again without difficulty, the bridge is back in its original position. If the crown or bridge does not fit properly, you have 5 minutes to repeat the operation.
Remove any excess cement with a micro-brush. After contact with saliva, cement takes 15-20 minutes to set. Avoid chewing for about 3 hours.
Clean the inside of the crown using the kit's micro-brush with warm water and soap. Rinse under running water. The crown should be damp but not wet.
Using a new micro-brush, clean the snags, i.e. the area where the crown or bridge will be replaced. Rinse the mouth with water, without drying the snags.
Apply a small amount of Fixobridge cement to the inner edge of the crown using a spatula. Take care not to fill the crown. For bridgework, use the spatula to apply a small amount of cement to the inner edges of the crowns.
Then press the crown onto the stump for around 3 minutes. In the case of a bridge, gently place it on the stumps and press with thumb and fingers. Bite down lightly to fix the bridge. When the jaws can be clamped again without difficulty, the bridge is back in its original position. If the crown or bridge does not fit properly, you have 5 minutes to repeat the operation.
Remove any excess cement with a micro-brush. After contact with saliva, cement takes 15-20 minutes to set. Avoid chewing for about 3 hours.
Calcium sulphate, glycol ether, barium sulphate, zinc oxide, acrylic polymer, triacetin.
